116 Chapter 3 Using the console interface
A unit/port number list is composed of one or more list items, each of which can be a single number or a range of numbers (where the numbers represents one or more ports). If a list item is preceded by a number and then a slash (/), the number represents a stack unit.
For example,
S1 in Figure 51 on page 115). It represents the following port order:
•Unit 1: ports 1 to 7
•Unit 2: ports 1 to 7 and port 9
•Unit 3: ports 1 to 4
•Unit 4: port 12
Accelerator keys for repetitive tasks
You can use certain keystrokes as “accelerator keys” to help speed up repetitive tasks. For example, suppose you want to modify the Port List field in the MAC Address Security Port List screen (Figure 51 on page 115). You can modify the port list in any of the following ways:
•Add a new port to an existing port number list.
•Remove a port from an existing port number list.
•Copy an existing field into an adjacent field.
Adding a new port to an existing port number list
In the example shown in Figure 51 on page 115, S3 shows the Port List field values as:
If you want to add another port (for example, port 2/9) to the existing port number list, you could highlight the field and then type another port list, including the new port number
