3Com MSR 50, MSR 30 manual Ipv6 default-route-advertise, 1271

1271

Table 297 Description on the fields of the display isis route ipv6 verbose command

Field	Description
Interface	Outbound interface
ExitIndex	Outbound interface index

ipv6 default-route-advertise

Syntax ipv6 default-route-advertise[ [ level-1level-2level-1-2] route-policyroute-policy-name ]*

undo ipv6 default-route-advertise [ route-policy route-policy-name]

View IS-IS view

Parameters route-policy-name: Specifies the name of a routing policy with a string of 1 to 19 characters.

level-1: Specifies the default route as Level-1.

level-2: Specifies the default route as Level-2.

level-1-2: Specifies the default route as Level-1-2.

n If no level is specified, the default route belongs to Level-2.

Description Use the ipv6 default-route-advertisecommand to generate a Level-1 or Level-2 IPv6 IS-IS default route.

Use the undo ipv6 default-route-advertisecommand to disable generating a default route.

No IPv6 IS-IS default route is generated by default.

With a routing policy, you can configure IPv6 IS-IS to generate the default route that must match the routing policy. You can use the apply isis level-1command in routing policy view to generate a default route in L1 LSPs, or use the apply isis level-2command in routing policy view to generate a default route in L2 LSPs, and use the apply isis level-1-2in routing policy view to generate a default route in L1 and L2 LSPs respectively.

Refer to “apply isis” on page 1191 for information about the apply isis command.

Examples # Configure the router to generate a default route in Level-2 LSPs.

<Sysname> system-view

[Sysname] isis

[Sysname-isis-1] ipv6 default-route-advertise