
Appendix C
\Nn Error control mode selection
This command determines the type of error control used by the modem when sending or receiving data.
\N0 | Buffer mode. No error control. |
\N1 | Direct mode. |
\N2 | MNP or disconnect mode. The modem attempts to connect |
| using |
| modem disconnects. |
| This is also known as MNP reliable mode. |
\N3 | V.42, MNP, or buffered (default). |
| The modem attempts to connect in V.42 error control mode. If |
| this fails, it attempts to connect in MNP mode. If this fails, it |
| connects in buffer mode and continues operation. This is also |
| known as V.42/MNP auto reliable mode (same as &Q5). |
\N4 | V.42 or disconnect. The modem attempts to connect in V.42 |
| error control mode. If this fails, the modem disconnects. |
\N5 | V.42. MNP or buffered (same as \N3). |
\N7 | V.42. MNP or buffered (same as \N3). |
Result Codes: | |
OK | n=0,1,2,3,4,5,7 |
ERROR | Otherwise |
\Qn Local flow control selection
\Q0 Disable flow control.
\Q1 XON/XOFF software flow control. \Q3 CTS/RTS to DTE (default). Result Codes:
OK n=0,1,3 ERROR Otherwise
PPENDIXA C