User's Manual

You may not use any copyrighted video or music data copied from a video camera except for your personal enjoyment.

If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped.

Make sure data transfer has ended or turn off the computer, before you:

Connect/disconnect an i.LINK device to/from the computer.

Connect/disconnect an i.LINK device to/from another i.LINK device that is connected to the computer.

Connecting

1.Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer.

OPTIONAL DEVICES

Figure 8-10 Connecting the i.LINK cable

2.Plug the other end of the cable into the device. Note the following when you use i.LINK:

You may need to install drivers for your i.LINK devices.

Not all i.LINK devices have been tested, therefore, compatibility with all i.LINK devices cannot be guaranteed.

Use S100, S200 or S400 cables no longer than three meters.

Some devices might not support standby or automatic off functions.

Do not connect or disconnect an i.LINK device while it is using an application or when the computer is automatically shutting it down to save power. Data might be destroyed.

8-14

Page 178
Image 178
Toshiba A40 Series manual Connecting the i.LINK cable