Modem
If you want to a more effect for the power management, you can select another mode, the High Power Savings which can save the power than the Normal Power Savings. To select it, follow the steps below.
1.Clicked the Power Management tab.
2.Select the High Power Savings in the Power Mode
3.Input a time in Power Save Delay (Seconds).
NOTE: If the High Power Saving is selected, you need to play an audio file once before you use a microphone or play an audio CD by the analog CD audio.
Modem
This section describes how to connect and disconnect the internal modem to and from a telephone jack.
NOTE: The internal modem does not support voice functions. All data and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable from the telephone jack.
2.Do not connect the modem to a digital telephone line. A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.
To select a region, follow the steps below.
1.Click start, point to All Programs, point to TOSHIBA point to Network- ing and click Modem Region Select.
NOTE: Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/Region in the Control Panel, the change may not take effect.
PERATINGO
BASICS
