Toshiba A40 Series manual Device Config, Parallel/Printer

HW SETUP AND PASSWORDS

User's Manual

NOTE: It is a good idea to create more than one Key FD in case a Key FD is damaged or lost.

To create a Key FD follow the steps below.

1.Turn off the computer’s power.

2.Connect the diskette drive to a USB port on the computer.

3.Set a diskette’s write-protect tab to the write enable position and insert the diskette in the drive.

NOTE: All data on the diskette will be destroyed.

4.Turn on the computer’s power. Password= will be displayed on the LCD.

5.Enter the password.

6.Press the Tab key.

Insert FD Ready (Y/N) will be displayed on the LCD.

7.Press Y.

Remove FD press key will be displayed on the LCD.

8.Remove the diskette and press any key.

Device Config

Device Configuration

This option lets you set the device configuration. All Devices BIOS sets all devices.

Setup by OS Operating system sets devices that it can control. (Default)

Parallel/Printer

Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port.

7-4