|
|
| Appendix C |
X5 | Enable | Enable | OK, RING, NO CARRIER, ERROR, |
|
|
| NODIALTONE, BUSY, CONNECT |
<RATE>, RRING, NO BONGTONE, DELAYED, BLACKLISTED, REORDER,
WARBLE, CALL WAITING DETECTED
Dial tone detect
Disabled: The modem dials a call regardless of whether it detects a dial tone.
Enabled: The modem dials only upon detection of a dial tone, and disconnects the call if the dial tone is not detected within 10 seconds.
Busy tone detect
| Disabled: The modem ignores any busy tones it receives. | |
| Enabled: | The modem monitors for busy tones. |
| Result Codes: | |
| OK | n=0,1,2,3,4,5 |
| ERROR Otherwise | |
Zn | Recall stored profile | |
| The modem performs a soft reset and restores (recalls) the configura- | |
| tion profile according to the parameter supplied. If no parameter is | |
| specified, zero is assumed. Either Z0 or Z1 restores the profile. | |
| Result Codes: | |
| OK | n=0,1 |
| ERROR Otherwise | |
&Cn | Data Carrier Detect (DCD) control | |
| Data Carrier Detect is a signal from the modem to the computer | |
| indicating that a carrier signal is being received from a remote modem. | |
| DCD normally turns off when the modem no longer detects the carrier | |
| signal. |
|
PPENDIXA C
