Hardware and system checklist

Check the region code on the DVD. It must match that on the DVD±RW drive. Region codes are listed in the Optical media section in Chapter 2, TheGrandTour.

Cannot write correctly If you have trouble writing, make sure you are observing the following precautions:

•Use only media recommended by TOSHIBA.

•Do not use the mouse or keyboard during writing.

•Use only the software supplied with the computer for recording.

•Do not run or start other software during writing.

•Do not jar the computer during writing.

•Do not connect/ disconnect external devices or install/removeinternalcardsduringwriting.

If problems persist, contact your dealer.

Diskette drive

For more information, refer to Chapter 4, Operating Basics.

Problem

Procedure

Drive does not

There may be a faulty cable connection. Check

operate

the connection to the computer and to the drive.

 

 

Some programs run

The software or hardware configuration may be

correctly but others

causing a problem. Make sure the hardware

do not

configuration matches your software needs.

 

 

You cannot access

Try another diskette. If you can access the

the external 3 1/2"

diskette, the original diskette (not the drive) is

diskette drive

probably causing the problem.

 

If problems persist, contact your dealer.

ROUBLESHOOTINGT

9-19