Toshiba A40 Series manual En Echo command, Hook control, Request ID information, Appendix C

Appendix C

;Return to command mode. Causes the modem to return to command mode after dialing a number, without disconnecting the call.

S=n Dial a telephone number previously stored using the &Zn=X command (See &Zn=X command for more information). The range is 0-3.

En Echo command

This command controls whether or not the characters entered from your computer keyboard are displayed on your monitor (echoed) while the modem is in command mode.

	E0	Disables echo to the computer.
	E1	Enables echo to the computer (default).
	Result Codes:
	OK	n=0,1
	ERROR	Otherwise
Hn	Hook control
	This command instructs the modem to go on-hook to disconnect a call,
	or off-hook to make the phone line busy.
	H0	Modem goes on-hook (default).
	H1	Modem goes off-hook.
	Result Codes:
	OK	n=0,1
	ERROR	Otherwise
In	Request ID information
	This command displays product information about the modem.
	I0	Returns modem identity string and driver version number.
	I3	Same as I0.
	I9	Returns region ID in English.
	Result Codes:
	OK	n=0,3,9
	ERROR	Otherwise
		C-3

PPENDIXA C