Toshiba A40 Series manual Display Current Configuration, Store current configuration

APPENDIX C

User's Manual

	&T0 Abort. Stops any test in progress.
	&T1 Local analog loop. This test verifies modem operation, as well
		as the connection between the modem and computer. Any
		data entered at the local DTE is modulated, then demodulated,
		and returned to the local DTE. To work properly, the modem
		must be off-line.
	Result Codes:
	OK	n=0
	CONNECT n=1
	ERROR	Otherwise
&V	Display Current Configuration
	This command displays the current configuration of the modem. If
	nonvolatile memory is supported the stored profiles are displayed
	as well.
	&V	View profiles.
&W	Store current configuration
	Saves the current (active) configuration (profile), including S-Regis-
	ters.
	The current configuration comprises a list of storable parameters
	illustrated in the &V command. These settings are restored to the
	active configuration upon receiving a Zn command or at power up.
	Refer to the &V command.
	&W	Stores the current configuration.
&Zn=x		Store telephone number

This command is used to store up to four dialing strings in the modem’s nonvolatile memory for later dialing. The format for the command is &Zn=“stored number” where n is the location 0-3 to which the number should be written. The dial string may contain up to 34 characters. The ATDS=n command dials using the string stored in location n.

Result codes:

OK n=0, 1, 2, 3 ERROR Otherwise

C-10