
OPERATING BASICS
User's Manual
Data verification
To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD.
1.
2.Mark the Record and Verify check box and select Byte compare.
3.Click the OK button.
The “Record and Verify” function automatically checks whether data has been correctly recorded onto a CD/DVD. “Byte compare” compares the original data file with the data recorded on the CD/DVD and checks that the data completely matches.
Media care
This section provides tips on protecting data stored on your CD/DVDs and diskettes.
Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them:
CD/DVDs
1.Store your CD/DVDs in the container they came in to protect them and keep them clean.
2.Do not bend the CD/DVD.
3.Do not write on, apply a sticker to, or otherwise mar the surface of the CD/DVD that contains data.
4.Hold the CD/DVD by its outside edge or the edge on the center hole. Finger- prints on the surface can prevent the drive from properly reading data.
5.Do not expose to direct sunlight, extreme heat or cold. Do not place heavy objects on your CD/DVDs.
6.If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the CD/ DVD. If necessary, use a cloth dampened in water or a neutral cleaner. Do not use benzine, thinner or similar cleaner.