3Com MSR 30, MSR 50 manual Them, If you want to use and at the same time, you must use them

2600 CHAPTER 173: VOIP CONFIGURATION COMMANDS

Table 683 Meanings of the characters in string

Character	Meaning
0-9	Numbers from 0 to 9. Each means a digit.
# and *	Each means a valid digit.
.	A wildcard. It can match any digit of a valid number. For example, 555. . . .
	matches any string that begins with 555 and with four additional
	characters.
!	The character or characters right in front of it does not appear or appears
	once. For example, 56!1234 can match 51234 and 561234.
+	The character or characters right in front of it appears once or several times.
	But its appearance at the beginning of the whole number means the
	number is E.164-compliant. For example, (1) 9876(54)+ matches 987654,
	98765454, 9876545454 and so on. (2) +110022 indicates 110022 is
	compliant with E.164.
-	Hyphen. It connects two values (the smaller one before it and the bigger
	one after it) to indicate a range. For example, “1-9” means numbers from 1
	to 9 (inclusive).

%The character or characters right in front of it does not appear, or appears several times. For example, 9876(54)% matches 9876, 987654, 98765454, 9876545454 and so on.

	[ ]	Select one character from the group. For example, [1-36] can match only
		one character among 1, 2, 3, and 6.
	( )	A group of characters. For example, (123) means a string “123”. It is usually
		used with “!”, “%”, and “+”. For example, “408(12)+” can match 40812
		or 408121212. But it cannot match 408. That is, “12” can appear
		continuously and it must at least appear once.
n	■ The character or characters in front of “!”, “%”, and “+” are not to be matched
		accurately. They are handled similar to the wildcard “.”. Moreover, these
		symbols cannot be used alone. There must be a valid digit or digits in front of
		them.
	■ If you want to use “[ ]” and “( )” at the same time, you must use them in the
		format “( [ ] )“. Other formats, such as “[ [ ] ]” and “[ ( ) ]” are illegal.
	■ “-” can only be used in “[ ]”, and it only connects the same type of characters,
		such as “0-9”. The formats like “0-A” are illegal.

Description Use the match-templatecommand to configure the number template for a voice entity.

Use the undo match-templatecommand to remove the configuration.

By default, no number template is bound to the local voice subscriber line in POTS view, no number template is configured for the terminating side when the POTS entity serves as a trunk, and no number template is configured for the voice entity in VoIP or VoFR entity view.

The number template defined by the match-templatecommand can be used to match the number reaching the corresponding voice entity. The voice entity will complete the call if the match is successful. The number template can be defined flexibly. It can not only be a string of a unique number like 01016781234, but also an expression that can match a group of numbers, such as “010[1-5]678...”. They