Selecting preset sound modes
You can select a preset sound mode suitable to the music genre.
1 Press EQ.
The last selected sound mode is recalled, and it is applied to the current source.
The EQ indicator lights up.
Ex.: When you have selected “FLAT” previously
2 Select the sound mode you want.
As you turn the control dial, the sound modes
change as follows:
FLAT OHard Rock OR & B*OPOP O JAZZ ODanceMusic OCountry OReggae O Classic OUSER 1 OUSER 2 OUSER 3 O
(back to the beginning)
* Rhythm and Blues
EQ level changes as you select the sound mode.
Ex.: When you select “POP”
To cancel the sound mode, select “FLAT” in
step 2.
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 16.
•To adjust the bass reinforcement level temporarily, see page 14.
To store a sound mode separately for each playback source (EQ Link)
Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source.
A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components.
•See also “Changing the general settings (PSM)” on page 17.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2 Press ¢ 
or 
4 to select “EQ LINK” (Equalization Link).
3 Turn the control dial clockwise to select “LINK ON.”
4 Press SEL (select) to finish the setting.
To cancel EQ Link repeat the same procedure and select “LINK OFF” in step 3.
•When “EQ LINK” is set to “LINK ON”
The selected sound mode can be stored in memory for the current source.
Each time you change to the same source, the same sound mode is also recalled, and shown after the source name.
•When “EQ LINK” is set to “LINK OFF”
The selected sound mode effect applies to all the sources selected.
ENGLISH
15
