When connecting a DVD player:
3: |
| : Turns on and off the power. |
| ||
| Starts playback. | |
¡: | • | |
|
| held. |
•Skip to the beginning of the next tracks when pressed briefly.
1: • Reverses the track when pressed and held.
•Go back to the beginning of the current track when pressed briefly.
Go back to the beginning of the previous tracks when pressed consecutively.
7: Stops playback.
Note:
When you press the above buttons, the display shows “DVD” and its operation mode (such as 3, 7 ).
When connecting a VCR:
: Turns on and off the power.
3: Starts playback.
¡:
1: Rewinds a tape when pressed and held.
7: Stops playback.
Note:
When you press the above buttons, the display shows “VCR” and its operation mode (such as 3, 7).
For KD-SH55:
You can connect two external components to this unit.
Connect one to the MP3 INPUT jack on the control panel, and the other to the CD changer jack on the rear.
Before operating the external component connected to the CD changer jack, select the external input correctly. (See “To select the external component to use – EXT INPUT” on page 20.)
If the input level of the external component connected to the MP3 INPUT jack is not high enough, increase the input level properly.
Without adjusting the input level, you may be surprised at a loud sound when you change the source from the external component to another. (See “To adjust the auxiliary input level – AUX ADJ” on page 20.)
1 Select the external component (AUX INPUT or LINE INPUT).
When you select a source, the power automatically comes on.
Each time you press the button, the source changes as described on page 7.
AUX INPUT: To select the component connected to the MP3 INPUT jack on the control panel
LINE INPUT: To select the component connected to the CD changer jack
•If “LINE INPUT” cannot be selected, see page 20 and select the external input (“LINE INPUT”). This cannot be used together with the CD changer.
2 Turn on the connected component and start playing the source.
ENGLISH
25
