RADIO BASIC OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune into a particular station.
Searching a station automatically: Auto search
1 Select the band (FM1 – 3, AM).
1 Press SOURCE 
repeatedly to select the tuner as the source.
2If necessary, press
BAND (B) repeatedly to select FM or AM. Each time you press the button, the band changes as follows:
FM 1
FM 2
FM 3 
AM
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Start searching a station.
Press ¢ 
to search stations of higher frequencies.
Press 
to search stations of lower frequencies.
When a station is received, searching stops.
8
To stop searching before a station is received, press the same button you have pressed for searching.
To turn in FM stations only with strong signals
1Press MODE (M) to enter the functions mode while listening to an FM broadcast.
2Press LO (local) while still in the functions mode, so that the LOCAL indicator lights up on the display.
This function works only while searching FM stations, including SSM preset.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
1 Press SOURCE 
repeatedly to select tuner as the source.
2If necessary, press
BAND (B) repeatedly to select FM or AM. Each time you press the button, the band changes as follows:
FM 1
FM 2
FM 3 
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
