Perle Systems CM-1000MM-XXXXXX, C-1000MM-XXXXXX manual Overview, Fiber port 2 MM2/SM2

Overview

This document contains instructions necessary for the installation and operation of the Perle Gigabit Fiber to Fiber Media Converter Module(s) that are used in conjunction with a Perle MCR chassis. The C-1000MM media converters are unmanaged modules, and the CM-1000MM are the managed converter modules. These products allow dissimilar 1000Base-X fiber interfaces to connect to one another. For information on the management options of the CM-1000MM module, refer to the MCR-MGT Module User’s Guide.

These are the fiber to fiber conversion models:

∙Multimode to Multimode (MM)

∙Multimode to Single Mode (SM)

∙Multimode to Single Mode Single Strand (MM)

The first fiber port will be multimode (MM) and the second fiber port can be either single mode (SM) or multimode (MM) depending on the model selected. They can operate over different wavelengths and distances. (See tables below).

Fiber port 1 – MM1

Model	Connector	Mode	Distance	Wavelength
				(TX/RX)
All models	SC/ST/LC	MM.	550 m/1804 ft.	850 nm

Fiber port 2 – MM2/SM2

Model	Connector	Mode	Distance	Wavelength
				(TX/RX)
C-1000MM-M2xx05	SC/ST/LC	MM	550 m/1804 ft.	850 nm
CM-1000MM-M2xx05
C-1000MM-S2xx10	SC/ST/LC	SM	10 km/6.2 mi.	1310 nm
CM-1000MM-S2xx10
C-1000MM-S2xx40	SC/ST/LC	SM	40 km/24.9 mi.	1310 nm
CM-1000MM-S2xx40
C-1000MM-S2xx70	SC/ST/LC	SM	70 km/43.5 mi.	1550 nm
CM-1000MM-S2xx70
C-1000MM-S2xx120	SC/ST/LC	SM	40 km/24.9 mi.	1550 nm
CM-1000MM-M2xx05

Gigabit Fiber to Fiber Media Converter Module – Installation Guide

2