Installing the Simplex Fiber Cable | Perle Systems C-1000MM-XXXXXX

Installing the Simplex Fiber Cable

1.Locate a 1000Base-X compliant simplex (1 strand) fiber cable with appropriate connectors.

2.Connect the fiber cable from one Converter to the other Converter/switch/fiber device.

Gigabit Fiber to Fiber Media Converter Module – Installation Guide

11

Image 11

Perle Systems C-1000MM-XXXXXX, CM-1000MM-XXXXXX manual Installing the Simplex Fiber Cable

Contents

1000MM-XXXXXX Fiber port 2 MM2/SM2 Overview TX/RX Auto-Config Jumper CM-1000MM only Installation Switch Position Mode Fiber Negotiation Switch Fiber Fault Alert Switch Link Mode Switch Sequence of Events Illustration of the FFA Remote Loopback Fiber 2 Switch Remote Loopback Fiber 1 Switch Installing Media Converter Modules Removing Media Convert Modules Installing the Duplex Fiber Cable Installing the Simplex Fiber Cable Status LED Operation Method TroubleshootingGeneral No connectivity Technical Specifications Fiber Optic Specifications Fiber Cabling Requirements EN 55022, Class a EN 55024, Class a Laser Safety IECCompliance Information Contacting Technical Support Warranty / Registration