Perle Systems CM-1000MM-XXXXXX Removing Media Convert Modules, Installing the Duplex Fiber Cable

Removing Media Convert Modules

1.Loosen the captive retainer screw on the front of the Media Converter Module and gently pull the module out.

2.If not inserting a replacement Media Converter Module then cover the opening slot with a face plate and secure the screw.

Installing the Duplex Fiber Cable

1.Locate a 1000Base-X compliant duplex (2 strands) fiber cable with appropriate connectors.

2.Connect the fiber cables from one Converter to the other Converter/switch/fiber device ensuring that the RX and TX are reversed at the opposite end.

Gigabit Fiber to Fiber Media Converter Module – Installation Guide

10