Flashes, Check light comes on | Miele W 3364 WPS instruction

Problem solving guide

A fault indicator light comes on but the wash programme continues as normal.

Fault indicator	Possible cause	Remedy A
The Check drain light	The drain outlet	Clean the drain filter and the drain
flashes.	is restricted.	pump as described in "Problem
		solving guide - Opening the drum
		door in the event of a blocked drain
		outlet and/or power failure".
The Check inlet light	The water inlet is	Check whether
flashes.	restricted.	– the stopcock is opened wide
		enough.
		– the inlet hose is kinked.
	The filter in the	Clean the filter.
	water inlet hose
	is dirty.
The Excess detergent	Excessive foam	Use less detergent next time and
check light comes on.	has built up	follow the manufacturer’s
	during washing.	instructions on dosage given on the
		packaging.
The Main wash	There is a fault.	Start the programme again.
indicator light is		If the fault indicator occurs again,
flashing.		contact the Service Department.
The Anti-crease/Finish	The position of the programme selector was altered
indicator light is	after the start of the programme. Turn the programme
flashing.	selector back to the programme previously chosen.

ATo switch off the fault indicator: switch the washing machine off with the I-On/0-Offbutton and turn the programme selector to d Finish.

36

Image 36

Miele W 3364 WPS operating instructions Flashes, Check light comes on, Indicator light is

Contents

Operating instructions for Washing machine W 3364 WPS Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Technical safety Correct usage Use Safety with children AccessoriesDisposal of your old machine Description of the machine Control panel Delay start Programme durationProgrammable functions Before using for the first time When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption Detergent How to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select Delay start if requiredSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Start the programme Unload the drum Additional options ShortPre-wash Soak Spinning Final spin speedRinse and interim spin To omit the final spin Rinse hold Delay start Select Delay startTo alter Delay start To cancel Delay start Cottons 30C to 95C Minimum iron* 30C to 60CDelicates cold to 40C 21ac Automatic 40C Programme chart Garment care label symbols Programme sequence Main wash Rinses Spinning Special features in the programme sequences Cancelling a programme Changing the programme sequenceChanging a programme Interrupting a programme Adding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesAdding fabric conditioner or starch separately Cleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panel Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Problem Possible cause RemedyProgramme does not start Wash programme stops and a fault indicator light comes on Fault indicator Possible cause Remedy aWater protection Call the Service Department System has reacted Flashing. - appears Display Indicator light is FlashesCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Use it to open the access flapBlocked drain outlet Remove the lever Opening the drum door After sales service Future updates PCAppliance guarantee Optional accessories Installation and connection Front view Rear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Please note Replacing the lid Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hose Connection to the water supply Maintenance and care Extension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Technical data Programmable functions For changing default settings Programmable functions Water plus systemFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS