Special features in the programme sequences | Miele W 3364 WPS

Programme sequence

This washing machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary.

The programme sequences outlined in the chart are based on the basic programme with a full load. Additional options which can be selected have not been taken into account.

The programme sequence display shows the stage the programme has reached.

Special features in the programme sequences:

Anti-crease:

At the end of every programme, with the exception of the Woollens programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. The door can be opened and laundry removed at any time during the anti-crease phase.

1)The water level in the rinses is increased when a temperature below 60°C is selected.

A third rinse is carried out if:

–there is too much foam in the drum

–a spin speed lower than 700 rpm has been selected

–Without spin has been selected

2)A third rinse is carried out if: Without spin has been selected

25

Image 25

Miele W 3364 WPS operating instructions Special features in the programme sequences

Contents

Operating instructions for Washing machine W 3364 WPS Disposal of the packing material Caring for our environmentDisposal of your old appliance or machine Contents Contents Consumption data Technical data Correct usage Technical safety Use Accessories Safety with childrenDisposal of your old machine Control panel Description of the machine Programme duration Delay startProgrammable functions Before using for the first time Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption Detergent Brief instructions How to wash correctlySort the laundry Select Delay start if required Switch on the washing machine Load the drumSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Unload the drum Start the programme Short Additional optionsPre-wash Soak Final spin speed SpinningRinse and interim spin To omit the final spin Rinse hold Select Delay start Delay startTo alter Delay start To cancel Delay start Minimum iron* 30C to 60C Cottons 30C to 95CDelicates cold to 40C 21ac Automatic 40C Programme chart Garment care label symbols Main wash Rinses Spinning Programme sequence Special features in the programme sequences Changing the programme sequence Cancelling a programmeChanging a programme Interrupting a programme Adding or removing laundry after a programme has started Correct detergent DetergentAll purpose Detergent for Coloured fabrics Delicates Whites Washing with several components Water softenersRight amount to dispense will depend on the following Colour run and dye removers / dyes Fabric conditioners and liquid starchAdding fabric conditioner or starch separately Cleaning the detergent dispenser drawer Cleaning and careExtra cleaning External casing and fascia panel Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem Possible cause Remedy Problem solving guideProgramme does not start Fault indicator Possible cause Remedy a Wash programme stops and a fault indicator light comes onWater protection Call the Service Department System has reacted Flashing. - appears Display Flashes Indicator light isCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Use it to open the access flap Procedure for draining the machineBlocked drain outlet Remove the lever Opening the drum door Future updates PC After sales serviceAppliance guarantee Optional accessories Front view Installation and connection Rear view Installing the washing machine Installation surfaceRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Replacing the lid Please note Miele Waterproof system Electronic unit and washing machine housingInlet hose Drain hose Connection to the water supply Extension hose Maintenance and care Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Consumption data Technical data Programmable functions For changing default settings Water plus system Programmable functionsFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS