Electrical connection U.K | Miele W 3364 WPS guide

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

54

Image 54

Miele W 3364 WPS operating instructions Electrical connection U.K, Non-rewireable plugs BS

Contents

Operating instructions for Washing machine W 3364 WPS Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Consumption data Technical data Technical safety Correct usage Use Safety with children AccessoriesDisposal of your old machine Description of the machine Control panel Delay start Programme durationProgrammable functions Before using for the first time Energy and water consumption When drying with a tumble dryerWashing environmentally and economically Detergent How to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select Delay start if requiredSelect programme Shut the door with a gentle swing Select additional options Select a spin speed Add detergent Start the programme Unload the drum Pre-wash Additional optionsShort Soak Rinse and interim spin SpinningFinal spin speed To omit the final spin Rinse hold To alter Delay start Delay startSelect Delay start To cancel Delay start Delicates cold to 40C 21ac Cottons 30C to 95CMinimum iron* 30C to 60C Automatic 40C Programme chart Garment care label symbols Programme sequence Main wash Rinses Spinning Special features in the programme sequences Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programme Adding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyesAdding fabric conditioner or starch separately Extra cleaning Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panel Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Problem Possible cause RemedyProgramme does not start Water protection Call the Service Department Wash programme stops and a fault indicator light comes onFault indicator Possible cause Remedy a System has reacted Flashing. - appears Display Indicator light is FlashesCheck light comes on General problems An unsatisfactory wash result Drum door does not open when you press the Door button Blocked drain outlet Procedure for draining the machineUse it to open the access flap Remove the lever Opening the drum door Appliance guarantee After sales serviceFuture updates PC Optional accessories Installation and connection Front view Rear view Installation surface Installing the washing machineRemoving the transit bars Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Please note Replacing the lid Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hose Connection to the water supply Maintenance and care Extension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Technical data Programmable functions For changing default settings Programmable functions Water plus systemFollow steps a to G to programme and store in memory Gentle action Suds cooling for Cottons Memory function Soak duration Page Alteration rights reserved/4506/W 3364 WPS