Programmable functions
Water plus system
This is used to select the water intake setting for the Water plus additional option.
There are four different options:
Setting 1:
an increase in the rinse water level
Setting 2:
an increase in the water level in the main wash and rinses (the washing machine is delivered with setting 2 programmed as standard)
Setting 3:
an extra rinse cycle in the Cottons and Minimum iron programmes
Setting 4:
an increase in the water level in the main wash and rinses and also an extra rinse cycle in the Cottons and Minimum iron programmes
Follow steps A to G to programme and store in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–Make sure that the programme selector is at the d Finish position.
APress the Start button and keep it pressed in whilst carrying out steps
BSwitch the machine on with the
CWait until the Start button indicator light comes on . . .
D. . . and then release the Start button.
ETurn the programme selector to the Cottons 60°C position:
A P will flash in the display alternating with the number 1, 2, 3 or 4.
FEach subsequent press on the Start button selects a different setting.
The number alternating with the P in the display refers to the settings as follows:
1= Setting 1 is selected
2= Setting 2 is selected
3= Setting 3 is selected
4= Setting 4 is selected
GSwitch the machine off with the
The Water plus button has now been allocated the setting you have chosen. This setting will remain in memory until another setting is programmed.
58
