Supported Product Binaries and Boot Codes
Table 1 shows the product binary files and boot codes that are supported by v5.2.2 of the Cajun switch software.
*Note: Before downloading and running v5.2.2, remove port mirrors with piggyback ports on
Table 1. v5.2.2 Product Binary and Boot Files
Type of Switch | Binary File | Boot File |
|
|
|
P550R | m5500r_v5.02.02.bin | m550boot_v5.00.01.bin |
|
|
|
P580 | m8000r_v5.02.02.bin | m8000boot_v5.00.01.bin |
|
|
|
P880 | m8800_v5.02.02.bin | m880boot_v5.00.01.bin |
|
|
|
P882 | m8000r_v5.02.02.bin | m8000boot_v5.00.01.bin |
|
|
|
*Note: The m8000r binary files run the supervisor module on both the P580 and P882 switches. These files replace the m8820_vx.x.x files.
Queue Classification and Servicing Features
Overview
Version v5.2.2 contains Queue Classification and Servicing functionality that you can activate from the switch’s CLI. You can configure Queue Classification and Servicing functionality for a module, or for individual ports on a module. The main components of the Queue Classification and Servicing functionality are:
■A hierarchical classification mechanism that classifies incoming traffic
■Priority queues through which the switch forwards classified traffic.
The switch first classifies the traffic and then, based upon the classification of the traffic, stores it in the appropriate priority queue. The switch services the queues according to the WFQ algorithm and assigns queue weights.
4 | June 14, 2001 |
