where

<slot> is the slot number. If you specify this parameter, then all ports on the module in slot <slot> are set the same way.

<slot-swport-range>is a slot and port range in the form of 3/1 or 3/1-5. If you specify this parameter, then only ports <swport- range> on the module in slot <slot> are set.

{onoff} indicates whether you want the port to ignore tag priority. Enter on for the port to ignore the tag priority.

Examples

To set all ports on the module in slot 3 to ignore the 802.1p tag priority, enter:

set port ignore-tag-priority 3 on

To set ports 1 through 5 on the module in slot 3 to not ignore the 802.1p tag priority, enter:

set port ignore-tag-priority 3/1-5 off

To set ports 1 through 5 on the module in slot 3 and port 1 on the module in slot 6 to ignore the 802.1p tag priority, enter:

set port ignore-tag-priority 3/1-5,6/1 on

Displaying the Port Settings

Command

Use the show port command to display the settings of a port. The syntax of the command is:

show port [{<slot><slot-swport-range>} [...,{<slot><slot-swport-range>}]]

where

<slot> is the slot number. If you specify this parameter, then the settings of all the ports on the module in slot <slot> are displayed.

<slot-swport-range>is a slot and port range in the form of 3/1 or 3/1-5. If you specify this parameter, then settings for only the ports <swport-range> on the module in slot <slot> are displayed.

610-0184-095

June 14, 2001

A-3

Page 37
Image 37
Avaya P550R, P580, P880 manual Displaying the Port Settings