Avaya P880, P580, P550R manual Setting WFQ, Overview

Setting WFQ

Overview

Setting the weighted fair queuing (WFQ) service policy involves two commands. In the first command, you specify the queue policy, the modules and ports for which you want to set the policy, and whether you want to set the queue service policy for ingress traffic, egress traffic, or both. In the second command, you specify the queue weights.

Command 1

The correct syntax for Command 1 is:

>(configure)# set queue-service {<slot><slot-

swport-range>}[...,{<slot><mod-port-range>}] wfq egress

where:

<slot> is the slot number.

<slot-swport-range>is a slot and port range in the form of 3/1 or 3/1-5. If you specify this parameter, then only the ports <swport-range> on the module in slot <slot> are set.

egress is the direction of traffic for which the policy is set.

610-0184-095 June 14, 2001 A-7