Avaya P880, P580, P550R manual Setting the Priority of a Port, Command

Appendix A: CLI Commands for Queue Classification and Servicing

Overview

This appendix contains the CLI commands that you use to configure the Queue Classification and Queue Servicing functionality in Version 5.2 of the Cajun switch software. CLI commands exist for the following tasks:

■"Setting the Priority of a Port" on page A-1

■"Setting a Port to Ignore Tag Priority" on page A-2

■"Displaying the Port Settings" on page A-3

■"Setting a Rule in an Access Control List" on page A-4

■"Displaying Access Control Lists" on page A-6

■"Setting WFQ" on page A-7

■"Displaying the Queue Service Settings" on page A-9

*Note: In this release, you can configure the Queue Classification and Queue Servicing features only by using the CLI. The features are not available in the Web Agent or SNMP.

Setting the Priority of a Port

Command

Use the set port priority command to set the priority of a port. The syntax of the command is:

set port default-priority {<slot><slot-swport- range>}[...,{<slot-num><slot-swport-range>}] <priority>

610-0184-095 June 14, 2001 A-1