Cisco Systems 12000 series manual Related Commands Description, CF-873

show running-config

mls flow ip destination mls flow ipx destination cns event-service server

!

spanning-tree portfast bpdu-guard spanning-tree uplinkfast spanning-tree vlan 200 forward-time 21 port-channel load-balance sdip

!

!

!

shutdown

!

!

.

.

.

In the following sample output from the show running-configcommand, the shape average command indicates that traffic shaping overhead accounting for ATM is enabled. The BRAS-DSLAM encapsulation type is qinq and the subscriber line encapsulation type is snap-rbe based on the AAL5 service.

Router# show running-config

.

.

.

subscriber policy recording rules limit 64

no mpls traffic-eng auto-bw timers frequency 0 call rsvp-sync

!

controller T1 2/0 framing sf linecode ami

!

controller T1 2/1 framing sf linecode ami

!

!

policy-map unit-test class class-default

shape average percent 10 account qinq aal5 snap-rbe

!

Related Commands		Command	Description
		bandwidth	Specifies or modifies the bandwidth allocated for a class belonging to a
			policy map, and enables ATM overhead accounting.
		boot config	Specifies the device and filename of the configuration file from which the
			router configures itself during initialization (startup).
		configure terminal	Enters global configuration mode.
		copy running-config	Copies the running configuration to the startup configuration. (Command
		startup-config	alias for the copy system:running-config nvram:startup-config
			command.)
		shape	Shapes traffic to the indicated bit rate according to the algorithm specified,
			and enables ATM overhead accounting.
		show interfaces	Displays statistics for all interfaces configured on the router or access server.
			Cisco IOS Configuration Fundamentals Command Reference
	July 2008			CF-873