Cisco Systems 12000 series manual Show rom-monitor slot num sp rp, CF-867

show rom-monitor slot

show rom-monitor slot

To display the ROM monitor (ROMMON) status, use the show rom-monitorcommand in user EXEC or privileged EXEC mode.

show rom-monitor slot num {sp rp}

Syntax Description

Command Modes

Command History

num	Displays the slot number of the ROMMON for which the status is to be displayed.
sp	Displays the ROMMON status of the switch processor.
rp	Displays the ROMMON status of the route processor.

User EXEC

Privileged EXEC

Release	Modification
12.2(14)SX	Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB	Support for this command on the Supervisor Engine 2 was integrated into
	Release 12.2(17d)SXB.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Usage Guidelines When you enter the show rom-monitor slot command, the output displays the following:

•Region region1 and region2—Displays the status of the ROMMON image and the order of preference from which the region1 or region2 images should be booted. The ROMMON image status values are as follows:

–First run—Indicates that a check of the new image is being run.

–Invalid—Indicates that the new image has been checked and the upgrade process has started.

–Approved—Indicates that the ROMMON field upgrade process has completed.

•Currently running—This field displays the currently running image and the region.

The sp or rp keyword is required only if a supervisor engine is installed in the specified slot.

Examples	This example shows how to display ROMMON information:
	Router# show rom-monitor slot 1 sp
	Region F1:APPROVED
	Region F2:FIRST_RUN, preferred
	Currently running ROMMON from F1 region
	Router#

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-867