show usbtoken
show usbtoken
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
To display information about the USB eToken (such as the eToken ID), use the show usbtoken command in privileged EXEC mode.
show usbtoken[0-9]:[all filesystem]
(Optional) One of the ten available flash drives you can choose from; valid | |
| values: |
|
|
all | (Optional) All configuration files stored on the eToken. |
|
|
filesystem | (Optional) Name of a configuration file. |
|
|
Privileged EXEC |
|
|
|
Release | Modification |
|
|
12.3(14)T | This command was introduced. |
|
|
12.4(11)T | This command was integrated into the Cisco 7200VXR |
|
|
Use the show usbtoken command to verify whether a USB eToken is inserted in the router.
The following example is sample output from the show usbtoken command:
Router# show usbtoken0
Token ID | :43353334 | |
Token device name | : token0 | |
Vendor name | : Vendor34 | |
Product Name | :Etoken Pro | |
Serial number | : 22273a334353 | |
Firmware version | : | 4.1.3.2 |
Total memory size | : 32 KB | |
Free memory size | : 16 KB | |
FIPS version | : | Yes/No |
Token state | : | “Active” “User locked” “Admin locked” “System Error” |
“Uknown” |
|
|
ATR (Answer To Reset) :"3B F2 98 0 FF C1 10 31 FE 55 C8 3"
Table 145 describes the significant fields shown in the display.
Table 145 show usbtoken Field Descriptions
Field
Token ID
Description
Token identifier.
| Cisco IOS Configuration Fundamentals Command Reference |
| July 2008 |
