Cisco Systems 12000 series manual CF-923

show version

Table 146 show version Field Descriptions (continued)

Field	Description
device uptime is ...	The amount of time the system has been up and running.
For example:
C3660-1 uptime is 1 week, 3
days, 6 hours, 41 minutes
System returned to ROM by	Shows the last recorded reason for a system reload, and time of last
reload-reason at time day date	reload.
For example:
System returned to ROM by
reload at 20:56:53 UTC Tue
Nov 4 2003
Last reload reason:	Shows the last recorded reason for a system reload.
reload-reason
For example:
Last reload reason: Reload
command
Last reset from reset-reason	Shows the last recorded reason for a system reset. Possible
For example:	reset-reasonvalues include:
Last reset from power-on	• power-on—System was reset with the initial power on or a
	power cycling of the device.
	• s/w peripheral—System was reset due to a software peripheral.
	• s/w nmi—System was reset by a nonmaskable interrupt (NMI)
	originating in the system software. For example, on some
	systems, you can configure the device to reset automatically if
	two or more fans fail.
	• push-button—System was reset by manual activation of a
	RESET push-button (also called a hardware NMI).
	• watchdog—System was reset due to a watchdog process.
	• unexpected value—May indicate a bus error, such as for an
	attempt to access a nonexistent address (for example, “System
	restarted by bus error at PC 0xC4CA, address 0x210C0C0”).
	(This field was formerly labeled as the “System restarted by”
	field.”)
System image file is	Displays the file location (local or remote filesystem) and the
“file-location/file-name”	system image name.
For example:
System image file is
"slot0:tftpboot/c3660-i-mz.123-
3.9.T2"

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-923