Cisco Systems 12000 series manual Show pci hardware, All the PCI bridge registers, CF-791

show pci hardware

show pci hardware

To display information about the Host-PCI bridge, use the show pci hardware command in EXEC mode.

show pci hardware

Syntax Description This command has no arguments or keywords.

Command Modes

Command History

EXEC

Release	Modification
11.2	This command was introduced.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Usage Guidelines	The output of this command is generally useful for diagnostic tasks performed by technical support only:
	Router# show pci hardware
	hardware PCI hardware		registers
	Each device on the PCI bus is assigned a PCI device number. For the
	C2600, device numbers		are as follows:
	Device	Device number
	0	First LAN device
	1	Second LAN device
	2	AIM device (if present)
	3	Not presently		used
	4	Port module	-	first PCI device
	5	Port module	-	second PCI device
	6	Port module	-	third PCI device
	7	Port module	-	fourth PCI device
	8-14	Not presently		used
	15	Xilinx PCI bridge

Examples	The following is partial sample output for the PCI hardware register, which also includes information on
	all the PCI bridge registers.
	router# show pci hardware
	XILINX Host-PCI Bridge Registers:
	Vendor / Device ID: 0x401310EE
	Status / Command: 0x040001C6
	PCI Slave Base Reg 0: 0x00000000
	PCI Slave Base Reg 1: 0x04000000
	Table 119 describes the significant fields shown in the display.

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-791