Cisco Systems 12000 series manual CF-908, Crc

show usb controllers

Interrupt Enable:0x196

Chip ID:0x3630

Buffer Status:0x0

Direct Address Length:0x80A00

ATL Buffer Size:0x600

ATL Buffer Port:0x0

ATL Block Size:0x100

ATL PTD Skip Map:0xFFFFFFFF

ATL PTD Last:0x20

ATL Current Active PTD:0x0

ATL Threshold Count:0x1

ATL Threshold Timeout:0xFF

Int Level:1
Transfer Completion Codes:
Success	:920
Bit Stuff	:0
No Response	:0
Underrun	:0
Buffer Overrun	:0
Transfer Errors:
Canceled Transfers	:2
Transfer Failures:
Interrupt Transfer	:0
Isochronous Transfer	:0
Transfer Successes:
Interrupt Transfer	:0
Isochronous Transfer	:0
USBD Failures:
Enumeration Failures	:0
Power Budget Exceeded:0
USB MSCD SCSI Class Driver Counters:
Good Status Failures	:3
Good Status Timed out:0
Device Never Opened	:0
Illegal App Handle	:0
Invalid Unit Number	:0
Application Overflow	:0
Control Pipe Stall	:0
Device Stalled	:0
Device Detached	:0
Invalid Logic Unit Num:0
USB Aladdin Token Driver Counters:
Token Inserted	:1
Send Insert Msg Fail	:0
Dev Entry Add Fail	:0
Dev Entry Remove Fail:0
Response Txn Fail	:0

Txn Invalid Dev Handle:0

USB Flash File System Counters: Flash Disconnected :0

Flash Device Fail :0 Flash startstop Fail :0

USB Secure Token File System Counters:

Token Inserted		:1
Token FS success		:1
Token	Max Inserted	:0
Token	Event	:0

Watched Boolean Create Failures:0

CRC	:0
Stall	:0
Overrun	:0
Other	:0

Buffer Underrun :0

Control Timeout :0

Bulk Transfer :0

Control Transfer:0

Bulk Transfer :26 Control Transfer:894

No Class Driver Found:0

Command Fail :0

Device not Found:0

Drive Init Fail :0

Bad API	Command :0
Invalid	Argument:0
Device in use		:0
Malloc Error		:0
Bad Command Code:0
Unknown	Error	:0

Token Removed :0

Response Txns :434

Request Txns :434

Request Txn Fail:0

Command Txn Fail:0

Flash Connected			:1
Flash	Ok		:1
Flash	FS	Fail	:0

Token Detached :0

Token FS Fail :0

Create Talker Failures:0

Destroy Talker Failures:0

	Cisco IOS Configuration Fundamentals Command Reference
CF-908	July 2008