Cisco Systems 12000 series manual CF-801, Router# show platform hardware capacity eobc

show platform hardware capacity

•Module-specific switching information, including the following information:

–Part number (WS-SUP720-BASE, WS-X6548-RJ-45, and so forth)

–Series (supervisor engine, fabric, CEF720, CEF256, dCEF256, or classic)

–CEF Mode (central CEF, dCEF)

The show platform hardware capacity vlan command displays the following VLAN information:

•Total VLANs

•VTP VLANs that are used

•External VLANs that are used

•Internal VLANs that are used

•Free VLANs

Examples	This example shows how to display CPU capacity and utilization information for the route processor,
	the switch processor, and the LAN module in the Cisco 7600 series router:
	Router# show platform hardware capacity cpu
	CPU Resources
	CPU utilization: Module				5 seconds		1 minute	5 minutes
		1	RP		0% /	0%	1%	1%
		1	SP		5% /	0%	5%	4%
		7			69% /	0%	69%	69%
		8			78% /	0%	74%	74%
	Processor memory: Module			Bytes:	Total		Used	%Used
		1	RP		176730048		51774704	29%
		1	SP		192825092		51978936	27%
		7			195111584		35769704	18%
		8			195111584		35798632	18%
	I/O memory: Module			Bytes:	Total		Used	%Used
	1	RP			35651584		12226672	34%
	1	SP			35651584		9747952	27%
	7				35651584		9616816	27%
	8				35651584		9616816	27%
	Router#

This example shows how to display EOBC-related statistics for the route processor, the switch processor, and the DFCs in the Cisco 7600 series router:

Router# show platform hardware capacity eobc

EOBC Resources
Module			Packets/sec	Total packets	Dropped packets
1	RP	Rx:	61	108982	0
		Tx:	37	77298	0
1	SP	Rx:	34	101627	0
		Tx:	39	115417	0
7		Rx:	5	10358	0
		Tx:	8	18543	0
8		Rx:	5	12130	0
		Tx:	10	20317	0
Router#

This example shows how to display the current and peak switching utilization:

Router# show platform hardware capacity fabric

Switch Fabric Resources

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-801