show subsys

show subsys

To display the subsystem information, use the show subsys command in privileged EXEC mode.

show subsys [class class name name]

Syntax Description

class class

(Optional) Displays the subsystems of the specified class. Valid

 

 

classes are driver, kernel, library, license, management, protocol,

 

 

and registry.

 

 

 

 

name name

(Optional) Displays the specified subsystem. Use the asterisk

 

 

character (*) as a wildcard at the end of the name to list all

 

 

subsystems, starting with the specified characters.

 

 

 

Command Modes

Command History

Privileged EXEC

Release

Modification

11.1

This command was introduced.

 

 

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

 

 

12.2(35)SE2

The license class was added, and this command was integrated into

 

Cisco IOS Release 12.2(35)SE1.

 

 

Usage Guidelines

Use the show subsys command to confirm that all required features are in the running image.

 

Following is sample output from the show subsys command:

Examples

 

 

Router# show subsys

 

 

 

 

 

 

 

Name

Class

Version

 

 

static_map

Kernel

1.000.001

 

 

 

 

 

arp

Kernel

1.000.001

 

 

 

 

 

ether

Kernel

1.000.001

 

 

 

 

 

compress

Kernel

1.000.001

 

 

 

 

 

alignment

Kernel

1.000.002

 

 

 

 

 

monvar

Kernel

1.000.001

 

 

 

 

 

slot

Kernel

1.000.001

 

 

 

 

 

oir

Kernel

1.000.001

 

 

 

 

 

atm

Kernel

1.000.001

 

 

 

 

 

ip_addrpool_sys

Library

1.000.001

 

 

 

 

 

chat

Library

1.000.001

 

 

 

 

 

dialer

Library

1.000.001

 

 

 

 

 

flash_services

Library

1.000.001

 

 

 

 

 

ip_localpool_sys

Library

1.000.001

 

 

 

 

 

nvram_common

Driver

1.000.001

 

 

 

 

 

ASP

Driver

1.000.001

 

 

 

 

 

sonict

Driver

1.000.001

 

 

 

 

 

oc3suni

Driver

1.000.001

 

 

 

 

 

oc12suni

Driver

1.000.001

 

 

 

 

 

ds3suni

Driver

1.000.001

 

 

 

 

 

 

 

Cisco IOS Configuration Fundamentals Command Reference

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

July 2008

 

 

 

 

CF-895

 

 

 

 

 

 

 

Page 219
Image 219
Cisco Systems 12000 series Show subsys class class name name, Following is sample output from the show subsys command