Cisco Systems 12000 series manual Show version, CF-918

show version

show version

To display information about the currently loaded software along with hardware and device information, use the show version command in user EXEC, privileged EXEC, or diagnostic mode.

show version

Cisco ASR 1000 Series Routers

	show version [rp-slot] [installed [user-interface] provisioned running]
Syntax Description	rp-slot	Specifies the software of the RP in a specific RP slot of a Cisco ASR 1000
		Series Router. Options include:
		• r0—the RP in RP slot 0.
		• r1—the RP in RP slot 1.
		• rp active—the active RP.
		• rp standby—the standby RP.
	installed	Specifies information on the software installed on the RP
	user-interface	Specifies information on the files related to the user-interface.
	provisioned	Specifies information on the software files that are provisioned.
	running	Specifies information on the files currently running.

Defaults

Command Modes

Command History

No default behavior or values.

User EXEC (>)

Privileged EXEC (#)

Diagnostic (diag)—Cisco ASR 1000 Series Routers only

Release	Modification
9.0	This command was introduced.
12.1EC	This command was integrated into Cisco IOS Release 12.1EC.
12.1(1a)T1	This command was modified to include information about the clock card on
	CMTS routers.
12.3BC	This command was integrated into Cisco IOS Release 12.3BC.
12.3(4)T	The output format of this command was updated.
12.2(14)SX	Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB	Support for this command on the Supervisor Engine 2 was extended to
	12.2(17d)SXB.
12.2(25)S	The output format of this command was updated.
12.2(33)SCA	This command was integrated into Cisco IOS Release 12.2(33)SCA. Support
	for the Cisco uBR7225VXR router was added.

	Cisco IOS Configuration Fundamentals Command Reference
CF-918	July 2008