Cisco Systems 12000 series manual Cisco 7200 Router, CF-921

show version

2 FastEthernet interfaces

4 Serial interfaces

DRAM configuration is 64 bits wide with parity disabled. 125K bytes of NVRAM.

16384K bytes of processor board System flash (Read/Write)

Flash card inserted. Reading filesystem...done.

20480K bytes of processor board PCMCIA Slot0 flash (Read/Write)

Configuration register is 0x2102

Cisco 7200 Router

The following is sample output from the show version command issued on a Cisco 7200 router running Cisco IOS Release 12.4(4)T. This output shows the total bandwidth capacity and the bandwith capacity that is configured on the Cisco 7200. Displaying bandwidth capacity is available in Cisco IOS Release 12.2 and later releases.

Router# show version

Cisco IOS Software, 7200 Software (C7200-JS-M), Version 12.4(4)T, RELEASE SOFTW)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Thu 27-Oct-05 05:58 by ccai

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVEE

BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.3(16), RELEASE SOFTWARE (fc4)

router uptime is 5 days, 18 hours, 2 minutes

System returned to ROM by reload at 02:45:12 UTC Tue Feb 14 2006 System image file is "disk0:c7200-js-mz.124-4.T"

Last reload reason: Reload Command

Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of memo. Processor board ID 26793934

R7000 CPU at 350MHz, Implementation 39, Rev 3.2, 256KB L2 Cache 6 slot VXR midplane, Version 2.6

Last reset from power-on

PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.

Current configuration on bus mb0_mb1 has a total of 440 bandwidth points.

This configuration is within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.

Current configuration on bus mb2 has a total of 390 bandwidth points

This configuration is within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com> for c7200 bandwidth points oversubscription and usage guidelines.

4 Ethernet interfaces

2 FastEthernet interfaces

2 ATM interfaces

125K bytes of NVRAM.

62976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 125952K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes). 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2002

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-921