Cisco Systems 12000 series manual Describes significant fields shown in these displays, CF-927

show version

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Wed 02-Feb-00 16:49 by ccai

Image text-base:0x60008900, data-base:0x61192000

ROM:System Bootstrap, Version 12.0(15)SC, RELEASE SOFTWARE

VXR1 uptime is 2 days, 1 hour, 24 minutes

System returned to ROM by power-on at 10:54:38 PST Sat Feb 5 2000

System restarted at 11:01:08 PST Sat Feb 5 2000

System image file is "slot1:ubr7200-p-mz.121-0.8.T"

cisco uBR7246VXR (NPE300) processor (revision B) with 122880K/40960K bytes of memory. Processor board ID SAB0329005N

R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache 6 slot VXR midplane, Version 2.0

Last reset from power-on

X.25 software, Version 3.0.0. National clock card with T1 controller 1 FastEthernet/IEEE 802.3 interface(s) 2 Cable Modem network interface(s)

125K bytes of non-volatile configuration memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K). 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K). 4096K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x0

Router#

Table 148 describes significant fields shown in these displays.

Table 148 show version Field Descriptions

Field	Description
IOS (tm) 7200 Software	Always specify the complete version number when reporting a
(UBR7200-P-M), Version xx.x	possible software problem. In the example, the version number
	is Cisco IOS Release 12.1(10)EC.
ROM: System Bootstrap	Bootstrap version string.
Router uptime is	The amount of time the system has been up and running.
System restarted at	Also displayed is a log of how the system was last booted, as a
	result of normal system startup or system error.
System image file is	If the software was booted over the network, the Internet
	address of the boot host is shown. If the software was loaded
	from onboard ROM, this line reads “running default software.”
cisco uBR7246VXR (NPE300)	The remaining output in each display shows the hardware
processor	configuration and any nonstandard software options.
Configuration register is	The configuration register contents, displayed in hexadecimal
	notation.

The output of the show version command can also provide certain messages, such as bus error messages. If such error messages appear, report the complete text of this message to your technical support specialist.

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-927