Cisco Systems 12000 series manual Show memory debug leaks Command Example, CF-720

show memory debug leaks

Note	All memory leak detection commands invoke normal mode memory leak detection, except when the low
	memory option is specifically invoked by use of the lowmem keyword. In normal mode, if memory leak
	detection determines that there is insufficient memory to proceed in normal mode, it will display an
	appropriate message and switch to low memory mode.
	show memory debug leaks Command Example
Examples
	The following example shows output from the show memory debug leaks command:
	Router# show memory debug leaks
	Adding blocks for		GD...
			PCI memory
	Address	Size	Alloc_pc	PID	Name
			I/O memory
	Address	Size	Alloc_pc	PID	Name
			Processor memory
	Address	Size	Alloc_pc	PID	Name
	62DABD28	80	60616750	-2	Init
	62DABD78	80	606167A0	-2	Init
	62DCF240	88	605B7E70	-2	Init
	62DCF298	96	605B7E98	-2	Init
	62DCF2F8	88	605B7EB4	-2	Init
	62DCF350	96	605B7EDC	-2	Init
	63336C28	104	60C67D74	-2	Init
	63370D58	96	60C656AC	-2	Init
	633710A0	304	60C656AC	-2	Init
	63B2BF68	96	60C659D4	-2	Init
	63BA3FE0	32832	608D2848	104	Audit Process
	63BB4020	32832	608D2FD8	104	Audit Process

Table 103 describes the significant fields shown in the display.

Table 103	show memory debug leaks Field Descriptions
Field		Description
Address		Hexadecimal address of the leaked block.
Size		Size of the leaked block (in bytes).
Alloc_pc		Address of the system call that allocated the block.
PID		The process identifier of the process that allocated the block.
Name		The name of the process that allocated the block.

show memory debug leaks chunks Command Example

The following example shows output from the show memory debug leaks chunks command:

Router# show memory debug leaks chunks

Adding blocks for GD...

			PCI memory
	Address	Size	Alloc_pc PID Name
	Cisco IOS Configuration Fundamentals Command Reference
CF-720			July 2008