Cisco Systems 12000 series manual Show memory ecc, Running Cisco IOS Release 12.023S, CF-728

show memory ecc

show memory ecc

Syntax Description

Command Modes

Command History

To display single-bit Error Code Correction (ECC) error logset data, use the show memory ecc command in privileged EXEC mode.

show memory ecc

This command has no arguments or keywords.

Privileged EXEC

Release	Modification
11.1(30)CC	This command was introduced in Cisco IOS Release 11.1(30)CC.
12.0(4)XE	This command was integrated into Cisco IOS Release 12.0(4)XE.
12.0(6)S	This command was integrated into Cisco IOS Release 12.0(6)S.
12.1(13)	This command was integrated into Cisco IOS Release 12.1(13).

Usage Guidelines	Use this command to determine if the router has experienced single-bit parity errors.
	The following is sample output from the show memory ecc command from a 12000-series router
Examples
	running Cisco IOS Release 12.0(23)S:
	Router# show memory ecc
	ECC Single Bit error log
	------------------------
	Single Bit error detected and corrected at 0x574F3640
	- Occured 1 time(s)
	- Whether a scrub was attempted at this address: Yes
	- Syndrome of the last error at this address: 0xE9
	- Error detected on a read-modify-write cycle ? No
	- Address region classification: Unknown
	- Address media classification : Read/Write Single Bit error detected and corrected at
	0x56AB3760
	- Occured 1 time(s)
	- Whether a scrub was attempted at this address: Yes
	- Syndrome of the last error at this address: 0x68
	- Error detected on a read-modify-write cycle ? No
	- Address region classification: Unknown
	- Address media classification : Read/Write
	Total Single Bit error(s) thus far: 2

	Cisco IOS Configuration Fundamentals Command Reference
CF-728	July 2008