show msfc
CF-772
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show msfc
To display Multilayer Switching Feature Card (MSFC) information, use the show msfc command in user
EXEC or privileged EXEC mode.
show msfc {buffers | eeprom | fault | netint | tlb}
Syntax Description
Defaults This command has no default settings.
Command Modes User EXEC
Privileged EXEC
Command History
Examples These examples display the show msfc command output:
Router# show msfc buffers
Reg. set Min Max
TX 640
ABQ 640 16384
0 0 40
1 6715 8192
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
Threshold = 8192
Vlan Sel Min Max Cnt Rsvd
1016 1 6715 8192 0 0
Router#
Router# show msfc eeprom
buffers Displays buffer-allocation information.
eeprom Displays the internal information.
fault Displays fault information.
netint Displays network-interrupt information.
tlb Displays information about the TLB registers.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.