Cisco Systems 12000 series manual Showmon, CF-938

showmon

showmon

To show both the ReadOnly and the Upgrade ROMmon image versions when you are in ROMmon mode, as well as which ROMmon image is running on the Cisco 7200 VXR or Cisco 7301 router, use the showmon command in ROM monitor mode.

showmon

Syntax Description This command has no arguments or keywords.

Defaults No default behavior or values

Command Modes

Command History

ROM monitor mode

Release	Modification
12.0(28)S	This command was introduced on the Cisco 7200 VXR router. It was
	introduced in ROMmon version 12.3(4r)T1 for the Cisco 7200 VXR router.
12.3(8)T	This command was integrated into Cisco IOS Release 12.3(8)T and
	supported on the Cisco 7200 VXR router and Cisco 7301 router. It was
	introduced in ROMmon version 12.3(4r)T2 for the Cisco 7301 router.
12.3(9)	This command was integrated into Cisco IOS Release 12.3(9) and supported
	on the Cisco 7200 VXR router and Cisco 7301 router.

Usage Guidelines	Use the showmon command when you are in ROM monitor mode. Use the show rom-monitor
	command when you are in Cisco IOS.
Examples	The following example, applicable to both the Cisco 7200 VXR and Cisco 7301 routers, uses the
	showmon command in ROMmon to display both ROMmon images and to verify that the Upgrade
	ROMmon image is running:
	rommon 1 > showmon
	ReadOnly ROMMON version is:
	System Bootstrap, Version 12.2(20031011:151758) [biff]
	Copyright (c) 2004 by Cisco Systems, Inc.
	Upgrade ROMMON version is:
	System Bootstrap, Version 12.2(20031011:151758) [biff]
	Copyright (c) 2004 by Cisco Systems, Inc.
	Upgrade ROMMON currently running
	Upgrade ROMMON is selected for next boot
	rommon 2 >

	Cisco IOS Configuration Fundamentals Command Reference
CF-938	July 2008