Cisco Systems 12000 series manual CF-783

show parser dump

enable : Enable control packets exchange (default)

.

.

.

! Ctrl-Z used here to interrupt output and return to CLI prompt.

Router# config terminal

Enter configuration commands, one per line. End with CNTL/Z. Router(config)# rtr 1

Router(config-rtr)# type udpEcho ? dest-ipaddr Destination address

Router(config-rtr)#type udpEcho dest-ipaddr ?

Hostname or A.B.C.D IP address or hostname

Router(config-rtr)#type udpEcho dest-ipaddr HOSTNAME ? dest-port Destination Port

Router(config-rtr)#type udpEcho dest-ipaddr HOSTNAME dest-port ? <1-65535> Port Number

Router(config-rtr)#type udpEcho dest-ipaddr HOSTNAME dest-port 1 ?

control	Enable or disable control packets
source-ipaddr	Source	address
source-port	Source	Port
<cr>

Router(config-rtr)#type udpEcho dest-ipaddr HOSTNAME dest-port 1 control ?

disable	Disable control packets exchange
enable	Enable control packets exchange (default)

In the following example, show parser dump output is redirected to a file on a remote TFTP server:

show parser dump exec extend redirect tftp://209.165.200.225/userdirectory/123-exec-commands.txt

Related Commands	Command	Description
	show <command> append	Redirects and adds the output of any show command to an existing
		file.
	show <command> redirect	Redirects the output of any show command to a file.
	show <command> tee	Copies the output of any show command to a file while displaying it
		on the terminal.
	show <command> include	Filters show command output so that only lines that containing the
		specified string are displayed.
	show <command> begin	Filters the output of any show command to display the output from the
		first instance of a specified string.
	show <command> exclude	Filters show command output so that it excludes lines that contain a
		particular regular expression.

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-783