Cisco Systems 12000 series manual Show stacks, CF-892, Router# show stacks

show stacks

show stacks

To monitor the stack usage of processes and interrupt routines, use the show stacks command in EXEC mode.

show stacks

Syntax Description This command has no arguments or keywords.

Command Modes

Command History

EXEC

Release	Modification
10.0	This command was introduced.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Usage Guidelines			The display from this command includes the reason for the last system reboot. If the system was reloaded
			because of a system failure, a saved system stack trace is displayed. This information is of use only to
			your technical support representative in analyzing crashes in the field. It is included here in case you
			need to read the displayed statistics to an engineer over the phone.
			The following is sample output from the show stacks command following a system failure:
Examples
			Router# show stacks
			Minimum process stacks:
			Free/Size	Name
			652/1000	Router Init
			726/1000	Init
			744/1000	BGP Open
			686/1200	Virtual Exec
			Interrupt level stacks:
			Level	Called Free/Size		Name
			1	0 1000/1000		env-flash
			3	738	900/1000	Multiport Communications Interfaces
			5	178	970/1000	Console UART
			System was restarted by bus error at PC 0xAD1F4, address 0xD0D0D1A
			GS Software (GS3), Version 9.1(0.16), BETA TEST SOFTWARE
			Compiled Tue 11-Aug-92 13:27 by jthomas
			Stack trace from system failure:
			FP: 0x29C158, RA: 0xACFD4
			FP: 0x29C184, RA: 0xAD20C
			FP: 0x29C1B0, RA: 0xACFD4
			FP: 0x29C1DC, RA: 0xAD304
			FP: 0x29C1F8, RA: 0xAF774
			FP: 0x29C214, RA: 0xAF83E
			FP: 0x29C228, RA: 0x3E0CA
			FP: 0x29C244, RA: 0x3BD3C
		Cisco IOS Configuration Fundamentals Command Reference
	CF-892					July 2008