Cisco Systems 12000 series Show pagp group-number counters internal neighbor pgroup, CF-776

show pagp

show pagp

To display port-channel information, use the show pagp command in user EXEC or privileged EXEC mode.

show pagp [group-number] {counters internal neighbor pgroup}

Syntax Description	group-number	(Optional) Channel-group number; valid values are a maximum of 64 values from 1
		to 282.
	counters	Displays the traffic information.
	internal	Displays the internal information.
	neighbor	Displays the neighbor information.
	pgroup	Displays the active port channels.

Defaults

Command Modes

Command History

This command has no default settings.

User EXEC

Privileged EXEC

Release	Modification
12.2(14)SX	Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB	Support for this command on the Supervisor Engine 2 was extended to
	Release 12.2(17d)SXB.
12.2(33)SRA	This command was integrated into Cisco IOS Release 12.2(33)SRA.

Usage Guidelines You can enter any show pagp command to display the active port-channel information. To display the nonactive information, enter the show pagp command with a group.

The port-channelnumber values from 257 to 282 are supported on the CSM and the FWSM only.

Examples			This example shows how to display information about the PAgP counters:
			Router#	show pagp	counters
				Information		Flush
			Port	Sent	Recv	Sent	Recv
		--------------------------------------
			Channel	group: 1
			Fa5/4	2660	2452	0	0
			Fa5/5	2676	2453	0	0
			Channel	group: 2
			Fa5/6	289	261	0	0
			Fa5/7	290	261	0	0
			Channel	group: 1023
			Fa5/9	0	0	0	0
			Cisco IOS Configuration Fundamentals Command Reference
	CF-776						July 2008