Cisco Systems 12000 series manual Show monitor session, CF-767

show monitor session

show monitor session

To display information about the ERSPAN, SPAN and RSPAN sessions, use the show monitor session command in user EXEC mode.

show monitor session [range session-rangelocal remote all session]

show monitor session [erspan-destination erspan-source egress replication-mode capabilitydetail]

Syntax Description	range session-range		(Optional) Displays a range of sessions; valid values are from 1 to 66.
	local		(Optional) Displays only local SPAN sessions.
	remote		(Optional) Displays both RSPAN source and destination sessions.
	all		(Optional) Displays all sessions.
	session		(Optional) Number of the session; valid values are from 1 to 66.
	erspan-destination		(Optional) Displays information about the destination ERSPAN sessions only.
			This keyword is not supported on the Supervisor Engine 2.
	erspan-source		(Optional) Displays information about the source ERSPAN sessions only.
			This keyword is not supported on the Supervisor Engine 2.
	egress		(Optional) Displays the operational mode and configured mode of the session
	replication-mode		and module session capabilities.
	capability
	detail		(Optional) Displays detailed session information.
Defaults	This command has no default settings.
Command Modes	User EXEC (>)
Command History	Release	Modification
	12.2(14)SX	This command was introduced on the Supervisor Engine 720.
	12.2(17d)SXB	Support was added for the Supervisor Engine 2.
	12.2(18)SXE	Support was added for the erspan-destinationand erspan-sourcekeywords
		on the Supervisor Engine 720 only.
	12.2(18)SXF	This command was updated as follows:
		• Support was added for the Supervisor Engine 32.
		• ERSPAN is supported in any switch fabric module functionality switching
			mode.
	12.2(33)SXH	The egress replication-mode capability keywords were added.

	Cisco IOS Configuration Fundamentals Command Reference
July 2008		CF-767