show usb device
show usb device
To display USB device information, use the show usb device command in privileged EXEC mode.
show usb device
Syntax Description |
| (Optional) Displays information only for the devices under the specified | |
|
|
| controller. |
|
|
|
|
|
| (Optional) Displays information only for the device with the specified | |
|
|
| address. |
|
|
| |
|
|
|
|
Defaults |
| Information for all devices attached to the system are displayed. | |
Command Modes
Command History
Privileged EXEC
Release | Modification |
12.3(14)T | This command was introduced. |
|
|
12.4(11)T | This command was integrated into the Cisco 7200VXR |
|
|
Usage Guidelines | Use the show usb device command to display information for either a USB flash drive or a USB eToken, | ||||
|
| as appropriate. | |||
| The following example is sample output from the show usb device command: | ||||
Examples | |||||
|
| Router# show usb device | |||
|
| Host Controller:1 | |||
|
| Address:0x1 | |||
|
| Device Configured:YES | |||
|
| Device Supported:YES | |||
|
| Description:DiskOnKey | |||
|
| ||||
|
| Version:2.0 | |||
|
| Serial Number:0750D84030316868 | |||
|
| Device Handle:0x1000000 | |||
|
| USB Version Compliance:2.0 | |||
|
| Class Code:0x0 | |||
|
| Subclass Code:0x0 | |||
|
| Protocol:0x0 | |||
|
| Vendor ID:0x8EC | |||
|
| Product ID:0x15 | |||
|
| Max. Packet Size of Endpoint Zero:64 | |||
|
| Number of Configurations:1 | |||
|
| Speed:Full | |||
|
| Selected Configuration:1 | |||
|
| Selected Interface:0 | |||
|
| Cisco IOS Configuration Fundamentals Command Reference |
|
|
|
|
|
| |||
|
|
|
|
|
|
| July 2008 |
|
|
|
|
|
|
|
| ||
