show running-config

show running-config

To display the contents of the current running configuration file or the configuration for a specific module, Layer 2 VLAN, class map, interface, map class, policy map, or virtual circuit (VC) class, use the show running-configcommand in user EXEC or privileged EXEC mode.

show running-config [options]

Syntax Description

options

(Optional) The following optional keywords can be entered with the show

 

 

running-configcommand to customize the output according to your specific needs.

 

 

Availability of these options varies by platform and Cisco IOS release. All options

 

 

listed here may not be available on your specific platform and release.

 

 

all—Expands the output to include the commands that are configured with

 

 

default parameters. If the all keyword is not used, the output does not display

 

 

commands configured with default parameters.

 

 

brief—Displays the configuration without certification data. The brief

 

 

keyword can be used with the linenum keyword.

 

 

class-mapname [linenum]—Displays class map information. The linenum

 

 

keyword can be used with the class-mapname option.

 

 

full—Displays the full configuration. The full keyword can be used with the

 

 

linenum keyword.

 

 

interface type number [linenum]Displays interface-specific configuration

 

 

information. If you use the interface keyword, you must specify the interface

 

 

type and the interface number (for example, interface ethernet 0). Common

 

 

interfaces include async, ethernet, fastEthernet, group-async,loopback,

 

 

null, serial, and virtual-template. Use the show run interface ? command to

 

 

determine the interfaces available on your system. The linenum keyword can

 

 

be used with the interface type number option.

 

 

linenum—Displays line numbers in the output. The brief or full keyword can

 

 

be used with the linenum keyword. The linenum keyword can be used with the

 

 

class-map,interface, map-class,policy-map, and vc-class keywords.

 

 

map-class[linenum]—Displays map class information. This option is

 

 

described separately; see the show running-configmap-classcommand page.

 

 

policy-mapname [linenum]—Displays policy map information. The linenum

 

 

keyword can be used with the policy-mapname option.

 

 

vc-classname [linenum]—Displays VC class information (display is available

 

 

only on certain routers such as the Cisco 7500 series—display is not available

 

 

on all platforms). The linenum keyword can be used with the vc-classname

 

 

option.

 

 

view full—Enables the display of a full running configuration. This is for

 

 

view-based users who typically can view only configuration commands that

 

 

they are entitled to access for that particular view.

 

 

module number—Specifies the module number.

 

 

vlan vlan-id—Specifies the VLAN information to display; valid values are

 

 

from 1 to 4094.

 

 

 

 

 

Cisco IOS Configuration Fundamentals Command Reference

 

 

 

 

 

 

 

July 2008

 

 

CF-869

 

 

 

 

 

Page 193
Image 193
Cisco Systems 12000 series manual Show running-config options, CF-869