Motorola CPEI 750 manual Configuring TCP/IP in Windows, Systems, 68P09292A81-B

Configuring TCP/IP 5

Chapter 5: Configuring TCP/IP

This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers). Two examples are provided in this document:

•Configuring TCP/IP in Windows 2000

•Configuring TCP/IP in Windows XP

NOTE

Follow the instructions in your computer user manual for other Operating

Systems.

Configuring TCP/IP in Windows 2000

1.On the Windows Desktop, click Start.

2.Select Settings and then Control Panel from the pop-up menus to display the Control Panel window:

Figure 5-1:Windows Control Panel

3.Double-click the Network and Dial-up Connections icon to display the Network and Dial-up Connections window:

68P09292A81-B	5-1
JUN 2008