1 | Desktop CPEi 750 User Guide |
Front of the CPE
The front of the CPE unit contains LED Link/Activity indicators. The LEDs provide the status of the unit and signal strength indicators for easy adjustment during setup.
Table
LED | Status |
Signal Strength | Full WiMAX Signal Strength is detected |
| when all WiMAX Signal Strength LEDs are |
| lit. |
| • All WiMAX Signal Strength LEDs are |
| off - very low signal detected. |
| • One to two WiMAX Signal Strength |
| LEDs are lit - low signal detected. |
| • Three to five WiMAX Signal Strength |
| LEDs are lit - high signal detected. |
|
|
WAN WiMAX | While acquiring access to the WiMAX |
| Network: |
| • All WiMAX Signal Strength LEDs vary |
| between ON, OFF and/or BLINKING |
| status. |
|
|
CAUTION
If all five WiMAX Signal Strength LEDs are blinking, then a software up- grade is in progress. Do NOT remove power to the CPE.
Back of the CPE
The back of the CPE unit contains the reset switch, AC Power Connector, Ethernet connector, Ethernet LED, Line 1 and Line 2 telephone ports.
| JUN 2008 |
