Toshiba 27A41 Adding channels to the TV’s memory, Changing channels, Setting up your TV, Press

Setting up your TV

Adding channels to the TV’s memory

Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory, you can erase channels or add your favorite channels.

To add channels:

1.Press MENU, then press or to display the SET UP menu.

2.Press ▲ or ▼ until the TV/CABLE selection is highlighted.

3. Press	or to highlight either		CH
		PICTURE AUDIO	SET UP OPTION
TV or CABLE, depending on
					CABLE
which you use.		TV / CABLE		TV
		CH PROGRAM		START
If you use an antenna, choose TV.		ADD / ERASE		ADD
If you use cable, choose CABLE.		SELECT		ADJUST

4.Press ▼ to select CH PROGRAM.

5.Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory.

While the TV is cycling through the channels, the message “PROGRAMMING NOW PLEASE WAIT” appears and count up the received channel.

6.When channel programming is complete, the message “COMPLETED (channel or cable number)” appears.

7.Press Channel ▲ or ▼ to view the programmed channels.

Adding and erasing channels manually

After you’ve programmed the channels, you can add or erase specific channels.

To add or erase channels:

1.	Select the channel you want to add or erase using Channel + or –.
	If adding channels, you must select the channel to add by using the
	Channel Number buttons.
2.	Press MENU, then press or
				CH
	to display the SET UP menu.
		PICTURE	AUDIO	SET UP		OPTION
3.	Press ▲ or ▼ to highlight ADD/	TV / CABLE			TV
	ERASE.
		CH PROGRAM			START
4.	Press or to select ADD or
							ERASE
		ADD / ERASE			ADD
	ERASE, whichever function you
	want to perform.	SELECT			ADJUST

5.Repeat steps 1-4 for other channels you want to add or erase.

Changing channels

To change the channel, you can:

•change the programmed channels using the remote control

•select a channel directly using the remote control

•scan the channels using the TV buttons

To change to the next programmed channel:

Press Channel + or – on the TV or remote control.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100).

For example, to select channel 125, press the 100 button, the 2

button, and the 5 button.

12

POWER TV VCR CABLE

CH RTN

1 2 3 ENT

4 5 6 100

7	8	9	0
		CH +
			Channel +/–
VOL			VOL
–			+

MENU/

ENTER

Menu

CH –

EXIT RECALL TV/VIDEO FAV

Exit

RESET	CAP/TEXT	1/2	FAV
CODE	MTS	SLEEP	MUTE

POWER	TV	VCR	CABLE
			CH RTN
1	2	3	ENT
4	5	6	100	Channel
				Numbers
7	8	9	0
		CH +		Channel +/–
VOL			VOL
–			+

MENU/

ENTER

Menu

CH –

EXIT RECALL TV/VIDEO FAV

Exit

RESET	CAP/TEXT	1/2	FAV
CODE	MTS	SLEEP	MUTE

3K10601B P12-21 12 21/08/2001, 14:27